Changelog 1.0
Release:
1.9.18
July 12, 2024
Added CAC for Model S
Fixed Model 3 CAC
Fixed Ideal Range for Model 3 (Rated range is removed)
Supports 108 cell voltages for all cars (Plaid, 3/Y LFP)
Release:
1.9.16
November 11, 2023
Fixed 3/Y/Plaid battery capacity, SOC, full range, DC-DC and HVAC duct signals. To see the new duct signals in HVAC tab you may have to 'factory reset this tab' on it.
Release:
1.9.15
September 15, 2022
Fixed welcome popup showing every start
Release:
1.9.14
September 3, 2022
Bluetooth permission fix for Android 10 and older
Release:
1.9.13
September 1, 2022
Upgraded to Android 13 target API to satisfy new Google Play requirements
Added BLUETOOTH_CONNECT permission for Android 13 requirements
Release:
1.9.12
October 16, 2022
Fixed battery capacity and SOC for Model 3 firmware 2022.36. New setting to control it, check Wrench menu. Thanks to tesLAX, Teslogic, and Canserver teams for help!
Fixed brake temperatures for Model 3/Y
Release:
1.9.11
July 11, 2022
Fixed Model 3/Y motor temperatures for firmware 2022.16 and 2022.20
Release:
1.9.10
April 25, 2022
Fixed Model 3/Y motor temperatures after firmware 2022.12
Release:
1.9.9
January 23, 2022
Fixed issues writing files on Android 10, 11 and 12
Log files now land in your Downloads folder for Android 10 and up, still in (internal storage)/ScanMyTesla for older Android versions.
Release:
1.9.8
December 10, 2021
Teslalogger SSL certificate fix
Release:
1.9.7
Oct 14, 2021
Crash fix for Android versions 4.4 and older
Release:
1.9.6
Oct 10, 2021
Fixed expired Teslalogger HTTPS certificate
Model 3/Y changes:
Added Misc tab, with lots of fun signals
Added BMS tab, with individual cell voltages
Added CAC signals
Fixed F & R torque
Fixed Max discharge power
Fixed min/max battery voltage
Lots of new HVAC signals
Anonymous usage and error statistics through Microsoft AppCenter
Release:
1.9.5
Apr 24, 2021
Removed some 12v signals for Model 3 which were corrupted in later car firmwares
Removed 'Battery degradation' calculation, it showed too high degradation as it also counted 'initial settling' of the battery from factory
Release:
1.9.4
Dec 21, 2020
Fixed Android 10 storage permissions
Release:
1.9.3
December 13, 2020
What's new in this release?
AC/DC charge counters + Energy/Regen fix for Model 3 FW 2020.48.10
Release:
1.9.2
Jun 20, 2020
Started rollout at 20.00% across all countries.
What's new in this release?
Added FW2020.20.5 support for all cars (changes in capacity signal definitions and consequentially SOC calculation)
New signals for Model 3:
Usable remaining (nominal - buffer)
Full pack when new
Battery degradation (calc from fullpackwhennew)
Fixed series/parallell and temperature targets for later firmwares
DC-DC output parameters
Rated & Ideal range
Vehicle mass est
Trailer detected
New signals for Model S:
Temperature targets
Front drive temperatures
Removed motor Dissipation and motor input power as they are no longer on the CAN-bus
Release:
1.9.1
January 8, 2020
What's new in this release?
Model 3 new stuff:
- SOC Expected - subtracts cold battery and better matches the car screens. Thanks Blog!
More Model 3:
- Radiator fan target
- Radiator bypass
- Five way valve angle
- Front & rear motor oil temp & flow. Temps might be oil pump internal and not the fluid itself?
Thanks Michael Schwab!
- Tidying of Model 3 Perf tab
- Removed some HVAC signals that went crazy after recent firmware updates. Will return when we figure them out.
Release:
1.9.0
December 24, 2019
What's new in this release?
Teslalogger support (https://www.e-mobility-driving-solutions.com/ev-longterm-diagnostics-our-teslalogger/?lang=en)
Speed tab improvements
Fixed Model 3 temperature targets on 2019.40.2 firmware
Release:
1.8.6
November 30, 2019
What's new in this release?
ECO GRAND PRIX 24h EV race edition
HUD mode
Max Charge Power bugfix
Release:
1.8.5
November 17, 2019
What's new in this release?
Bugfixes:
- Arrows & copy button now disappears on delete
- Packets per second counter added 100 packets per second
New Model 3 signals:
- Max charge current (calculated from battery volts * max charge current)
- HVAC tab with signals contributed by Michael Schwab
- 12v battery status contributed by Michael Schwab
Release:
1.8.4
October 26, 2019
What's new in this release?
Added Model 3 signals:...
Max / min pack voltage
Max charge current
Max discharge current
Series/Parallel
Coolant active and passive target temps
Release:
1.8.3
What's new in this release?
Long-press auto selects item
Arrow buttons to move items
Copy-button
Bugfix on pasting duplicate items
Release:
1.8.2
What's new in this release?
Firmware V10 adjustments for Model 3:
New signals:
Front & rear Torque
Front & rear RPM
Front & rear drive unit temperatures
Steering angle
Pedal positions
Release:
1.8.1
What's new in this release?
Model 3 changes, to match firmware 2019.28.3.1 and later:
Removed F and R torque
Added old R torque (ID 0x108)
Changed F and R power definitions
Removed SOC UI, avg, min, max from Battery tab, to avoid confusion. Still exists in All tab.
Release:
1.8.0
August 5, 2019
What's new in this release?
Cell imbalance in mV for all cars
for Model 3:
Trips
Battery and powertrain coolant flow
Cell voltages: Min, max and mid
Totals tab, including:
AC charge total
DC charge total
Regen total
Energy (while driving) total
Regen %
Odometer distance
Consumption
Stationary (energy used while car is off)
Release:
1.7.4
July 3, 2019
What's new in this release?
Battery amp offset auto-detection, to support new firmware on 200 kw charge enabled cars
Added 'cell temp mid' for model 3
Release:
1.7.3
June 21, 2019
What's new in this release?
Re-introduced model S spam filter - should remove occational corrupt readings on slower adapters
Adjusted Model 3 speed scaling slightly
Fixed Model 3 speed wrap-around at 130 kph
BMS gauge now show units
Garbled gauges on tab change bugfix
Release:
1.7.2
June 2, 2019
What's new in this release?
Speed timers for Model S imperial units fix
If some timers (esp. 0-60) are not showing, select 'Factory reset this tab' for the Speed tab.
Release:
1.7.1
May 31, 2019
What's new in this release?
Speed timers fix with imperial units
Release:
1.7.0
May 26, 2019
What's new in this release?
New tab: Speed, with 0-60, 0-100 and other timers. The accuracy is not yet known, please compare to pro timing equipment and report back.
New gauge type: Model S BMS heatmap gauge can now be used in any tab
Moved the 'All' tab to the very end, to give users a lighter start, and remove some clutter
Model S changes:
'Thermal load' -> 'Thermal controller'
'Cooling/Heating' removed, replaced with 'Thermal Load'
Model 3 changes:
'Battery temp' is renamed to 'battery min temp', as it gives the coldest cell/module
Release:
1.6.1
April 22, 2019
What's new in this release?
Model 3 improvements:
Layout, tab and signal refinements
Trip and Total tabs removed for now, as Trip system is not yet working for Model 3
Release:
1.6.0
April 7, 2019
What's new in this release?
Model 3 support!
Bugfixes
Model S/X thermal controller load
Numerous Android 9 compatibility and layout adjustments
We have some issues with Huawei P20 Pro, possibly some other Android 9 devices, where action is slow and stuttering. Please provide feedback if you manage to resolve this by phone power saving settings, or have other input regarding the issue.
Release:
1.5.1
October 25, 2018
What's new in this release?
Fixed 'coolant heater exit'
Fixed 'watt pedal'
Fixed Powertrain pump 2. Will only be visible if it gives > 0 %, to hide it on RWD cars which does not have it.
Added 'ATMA before filters', this will modify the behaviour of the bluetooth adapter setup and may improve compatibility with some ELM327 adapters
Release:
1.5.0
July 17, 2018
What's new in this release?
Factory reset this tab
Record button (long press for settings)
CAN dump (OBDLink MX hangs after a while, this is a MX firmware bug which they will not acknowledge)
Bluetooth/comms stability improvements
New BMS tab, idea by André Kjellstrup
Redesigned most tabs
Removed Cells tab
New readings:
Coolant heater
Series/Parallel
Battery pumps
Powertrain pump
Radiator bypass
Chiller bypass
Coolant heater
PTC air heater
Refrigerant temp
Release:
1.4.4
April 20, 2018
What's new in this release?
Gauges now scale better, and are more tablet friendly
SOC Min and SOC UI are back by popular demand and legacy reasons
Release:
1.4.3
March 25, 2018
What's new in this release?
Added 'Battery inlet' and 'PT Inlet'. These measure the coolant temperature going into the battery, and from crossover valve towards the drive unit(s). Battery Inlet measure the coolant after the battery heater
Redesigned Temps tab to include these
Improved error handling for bluetooth adapter
Fixed 4,999V on last cell of 75 batteries
Release:
1.4.2
Feb 24, 2018
What's new in this release?
'BMS Max charge' & 'BMS Max discharge' are back, they were lost in the spam filter.
'HVAC power' improved accuracy
Bluetooth handler stability and error catching improvements
Release:
1.4.1
Feb 15, 2018
What's new in this release?
- Reset Trip bugfix
- Status text overflow fix
Release:
1.4.0
Feb 8, 2018
What's new in this release?
- New tab: Efficiency and energy categorization
- Help menu
- New welcome screen
- Fixed unit conversion for HVAC
- Redesigned HVAC
- HVAC vent scaling fix (confirmed with Fluke)
- Some HVAC items removed, could not be confirmed. Others confirmed with Fluke and a hair dryer :)
- Total tab brought back. Note this tab can be inaccurate on older cars (regen shows too much and AC/DC charged too little)
- 'Combined power' bugfix (did not work alone)
Release:
1.3.0
Jan 1, 2018
What's new in this release?
- New BMS tab, resembles the car's BMS diagnostic screen
- Redesigned Temps tab
- 'Reset Gauge Throw' menu option
- Cell volt/temp gauge throw will reset every minute
- Removed wheel speeds from Perf tab (they only work on early Model S, but are still available for copying from the All tab)
Release:
1.2.0
Dec 9
What's new in this release?
- HVAC tab
HVAC controls decoded by Marc Olivier Chouinard from teslalog.com
Many items here are experimental, please test and give feedback if you find better naming or scaling of the values.
- Wheel speeds
- Calculated final drive gear ratios from RPM and wheel speeds (experimental)
- Improved brake pedal scaling
- New tabs can now be created from the tab menu
- Removed 3 old less accurate SOC calculations
Release:
1.1.0
Nov 3
What's new in this release?
"All" tab will now show the latest/newest items
Link to bluetooth settings from OBD selector
Timeout/retry of bluetooth connection
New SOC calculation: (nominalRemaining - buffer) / (nominalFullPackEnergy - buffer) * 100.0.
This seems to be exactly what the car shows you.
From the same logic:
- Usable full pack (nominalFullPackEnergy-buffer));
- Usable remaining (nominalRemaining-buffer));
These will hopefully be the most realistic estimates from this app so far.
Release: 1.0.0
Sep 25
What's new in this release?
Min/max values bugfix
Release: 0.9.9
Sep 24
What's new in this release?
Front RPM is back (taken by spam filter)
Gauges now work on Android versions older than 5.0
Unit conversion fixes (especially min/max values are now converted correctly)
Release: 0.9.8
Sep 13, 10:53 PM
What's new in this release?
Gauges! Work in progress, please report layout/size/font bugs or other strange behaviours
New default tabs and layouts! Reset tabs to see the new default layouts. (Stored trips will be lost)
lb/ft conversion fixed
More tidying of tabs
Added 'SOC nominal' calculated from Nominal remaining / Nominal Full Pack * 100
Release: 0.9.7
Aug 1, 8:14 PM
What's new in this release?
Trips
AC and DC charge counters
Stores your choice of metric/imperial units
Trips work with total counters from the car. This means that the start of a trip is merely a bookmark, you only need to run the app when you want to start (or reset) a trip. After that the app does not need to be running, until you want to read your trip stats.
Please note that trips in this app differs from the Tesla on-screen trips by that it also counts standby/parked battery usage/losses.
Release: 0.9.6
Jul 21, 10:33 AM
What's new in this release?
Multiple trips
Storage of trips
AC and DC charge counters
Trips work with total counters from the car. This means that the start of a trip is merely a bookmark, you only need to run the app when you want to start (or reset) a trip. After that the app does not need to be running, until you want to read your trip stats. Please note that trips in this app differs from the Tesla on-screen trips by that it also counts standby/parked battery usage/losses.
Release: 0.9.4
Feb 26, 10:56 PM
What's new in this release?
Data integrity improvements (fewer crazy values)
Unit conversion for imperial units
Tidying up the tabs
Release: 0.9.3
Feb 12, 11:03 PM
What's new in this release?
+ CSV files now have a timestamp (milliseconds)
Release: 0.9.2
Feb 8, 10:29 AM
What's new in this release?
+ Another bugfix for CSV on international language phones
Release: 0.91
Feb 7, 8:49 AM
What's new in this release?
+ CSV bugfix on international language phones (comma as decimal point would screw up the CSV logs)
Release: 0.9
Feb 2, 8:53 AM
What's new in this release?
Log browser
Logs are now written to /sdcard/ScanMyTesla/ (App can only get permission to write logs on Android 5.0. Browsing for logs is acting strange in pre-5.0)
Release: 0.8
Jan 28, 8:18 PM
What's new in this release?
Cut & paste
Composite values will maintain correct canbus filters
CSV logging
Raw logging (for dev)
Tabs now remember deleted or added/pasted items (but it is not yet stored when app is restarted - coming soon)
Trip tab cleanup
Added real-time consumption
Context menu (long-press an item)
Options menu (little down-arrow)
Threading bugfixes
Release: 0.7
Jan 11, 11:39 PM
What's new in this release?
Fixed negative cell temperatures
Added lots of front drive data
Improved bluetooth stability
Release: 0.6
Jan 8, 7:54 PM
What's new in this release?
Rewritten bluetooth handling
Supports ST command set (for OBDLink MX et al)
Dynamic filters
Long press to delete values
Release: 0.5
Dec 12, 2016, 11:34 PM
What's new in this release?
Improved bluetooth adapter compatibility
New cell visualisation
Various fixes
Release: 0.4
Dec 11, 2016, 2:05 PM
What's new in this release?
Tabs
Various fixes
Accidentally left debug logging enabled
Release: 0.3
Dec 11, 2016, 11:34 AM
What's new in this release?
Tabs
Various fixes
Release: 0.1
Dec 4, 2016, 9:28 PM
What's new in this release?
Now supports more OBD2 devices - app doesn't wait for init string from the adapter upon connection, which some give and some don't.
Retries setup commands if no response is given. Will fix lost commands on startup
Initialises CAN protocol (auto-detect) on each startup. Fixes 'silent' mode (where the OBD adapter had missed one or more setup commands, and was sending unrecognized formats to the app, leaving the app silent (black screen).
Release: Alpha
Dec 1, 2016, 11:04 AM
What's new in this release?
No release notes.